pub struct Pallet<T>(_);
Expand description

The pallet implementing the on-chain logic.

Trait Implementations§

source§

impl<T: Config> Callable<T> for Pallet<T>

source§

impl<T> Clone for Pallet<T>

source§

fn clone(&self) -> Self

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl<T> Debug for Pallet<T>

source§

fn fmt(&self, fmt: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl<T: Config> GetStorageVersion for Pallet<T>

source§

fn current_storage_version() -> StorageVersion

Returns the current storage version as supported by the pallet.
source§

fn on_chain_storage_version() -> StorageVersion

Returns the on-chain storage version of the pallet as stored in the storage.
source§

impl<T: Config> Hooks<<T as Config>::BlockNumber> for Pallet<T>where T::AccountId: Origin,

source§

fn on_initialize(_bn: BlockNumberFor<T>) -> Weight

Block initialization.

§

fn on_finalize(_n: BlockNumber)

The block is being finalized. Implement to have something happen.
§

fn on_idle(_n: BlockNumber, _remaining_weight: Weight) -> Weight

This will be run when the block is being finalized (before on_finalize). Implement to have something happen using the remaining weight. Will not fire if the remaining weight is 0. Return the weight used, the hook will subtract it from current weight used and pass the result to the next on_idle hook if it exists.
§

fn on_runtime_upgrade() -> Weight

Perform a module upgrade. Read more
§

fn offchain_worker(_n: BlockNumber)

Implementing this function on a module allows you to perform long-running tasks that make (by default) validators generate transactions that feed results of those long-running computations back on chain. Read more
§

fn integrity_test()

Run integrity test. Read more
source§

impl<T: Config> IntegrityTest for Pallet<T>where T::AccountId: Origin,

source§

fn integrity_test()

Run integrity test. Read more
source§

impl<T: Config> MailboxCallbacks<<Pallet<T> as Messenger>::OutputError> for MailBoxCallbacks<T>where T::AccountId: Origin,

§

type Value = <Pallet<T> as Messenger>::MailboxedMessage

Callback relative type. Read more
§

type BlockNumber = <T as Config>::BlockNumber

Callback relative type. Read more
§

type GetBlockNumber = GetBlockNumber<T>

Callback used for getting current block number.
§

type OnInsert = ()

Callback on success insert.
§

type OnRemove = ()

Callback on success remove.
source§

impl<T: Config> Messenger for Pallet<T>where T::AccountId: Origin,

Message processing centralized behavior for Gear Messenger Pallet.

See gear_common::storage::Messenger for complete documentation.

§

type BlockNumber = <T as Config>::BlockNumber

Block number type of the messenger.
§

type Capacity = u32

Capacity of the messenger. Read more
§

type Error = Error<T>

Inner error type generated by gear’s storage types.
§

type OutputError = DispatchError

Output error of each storage algorithm. Read more
§

type MailboxFirstKey = <T as Config>::AccountId

First key of the mailbox storage. Read more
§

type MailboxSecondKey = MessageId

Second key of the mailbox storage. Read more
§

type MailboxedMessage = StoredMessage

Stored values type for Self::Mailbox. Read more
§

type QueuedDispatch = StoredDispatch

Stored values type for Self::Queue. Read more
§

type WaitlistFirstKey = ProgramId

First key of the waitlist storage. Read more
§

type WaitlistSecondKey = MessageId

Second key of the waitlist storage. Read more
§

type WaitlistedMessage = StoredDispatch

Stored values type for Self::Waitlist. Read more
§

type DispatchStashKey = MessageId

Key for value types for Self::DispatchStash. Read more
§

type Sent = CounterImpl<<Pallet<T> as Messenger>::Capacity, SentWrap<T>>

Amount of messages sent from outside (from users) within the current block. Read more
§

type Dequeued = CounterImpl<<Pallet<T> as Messenger>::Capacity, DequeuedWrap<T>>

Amount of messages dequeued with the current block. Read more
§

type QueueProcessing = TogglerImpl<QueueProcessingWrap<T>>

Allowance of queue processing. Read more
§

type Queue = QueueImpl<DequeueImpl<MessageId, <Pallet<T> as Messenger>::QueuedDispatch, <Pallet<T> as Messenger>::Error, HeadWrap<T>, TailWrap<T>, DispatchesWrap<T>, QueueCallbacks<T>>, DispatchError, QueueKeyGen>

Gear message queue. Read more
§

type Mailbox = MailboxImpl<MailboxWrap<T>, <Pallet<T> as Messenger>::MailboxedMessage, <Pallet<T> as Messenger>::BlockNumber, <Pallet<T> as Messenger>::Error, DispatchError, MailBoxCallbacks<T>, MailboxKeyGen<<T as Config>::AccountId>>

Gear mailbox. Read more
§

type Waitlist = WaitlistImpl<WaitlistWrap<T>, <Pallet<T> as Messenger>::WaitlistedMessage, <Pallet<T> as Messenger>::BlockNumber, <Pallet<T> as Messenger>::Error, DispatchError, WaitListCallbacks<T>, WaitlistKeyGen>

Gear waitlist. Read more
§

type DispatchStash = DispatchStashWrap<T>

§

fn reset()

Resets all related to messenger storages. Read more
source§

impl<T: Config> OffchainWorker<<T as Config>::BlockNumber> for Pallet<T>where T::AccountId: Origin,

source§

fn offchain_worker(n: <T as Config>::BlockNumber)

This function is being called after every block import (when fully synced). Read more
source§

impl<T: Config> OnFinalize<<T as Config>::BlockNumber> for Pallet<T>where T::AccountId: Origin,

source§

fn on_finalize(n: <T as Config>::BlockNumber)

The block is being finalized. Implement to have something happen. Read more
source§

impl<T: Config> OnGenesis for Pallet<T>

source§

fn on_genesis()

Something that should happen at genesis.
source§

impl<T: Config> OnIdle<<T as Config>::BlockNumber> for Pallet<T>where T::AccountId: Origin,

source§

fn on_idle(n: <T as Config>::BlockNumber, remaining_weight: Weight) -> Weight

The block is being finalized. Implement to have something happen in case there is leftover weight. Check the passed remaining_weight to make sure it is high enough to allow for your pallet’s extra computation. Read more
source§

impl<T: Config> OnInitialize<<T as Config>::BlockNumber> for Pallet<T>where T::AccountId: Origin,

source§

fn on_initialize(n: <T as Config>::BlockNumber) -> Weight

The block is being initialized. Implement to have something happen. Read more
source§

impl<T: Config> OnRuntimeUpgrade for Pallet<T>where T::AccountId: Origin,

source§

fn on_runtime_upgrade() -> Weight

Perform a module upgrade. Read more
source§

impl<T: Config> PalletInfoAccess for Pallet<T>

source§

fn index() -> usize

Index of the pallet as configured in the runtime.
source§

fn name() -> &'static str

Name of the pallet as configured in the runtime.
source§

fn module_name() -> &'static str

Name of the Rust module containing the pallet.
source§

fn crate_version() -> CrateVersion

Version of the crate containing the pallet.
source§

impl<T: Config> PalletsInfoAccess for Pallet<T>

source§

fn count() -> usize

The number of pallets’ information that this type represents. Read more
source§

fn infos() -> Vec<PalletInfoData>

All of the pallets’ information that this type represents.
source§

impl<T> PartialEq<Pallet<T>> for Pallet<T>

source§

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl<T: Config> StorageInfoTrait for Pallet<T>

source§

fn storage_info() -> Vec<StorageInfo>

source§

impl<T: Config> WhitelistedStorageKeys for Pallet<T>

source§

fn whitelisted_storage_keys() -> Vec<TrackedStorageKey>

Returns a Vec<TrackedStorageKey> indicating the storage keys that should be whitelisted during benchmarking. This means that those keys will be excluded from the benchmarking performance calculation.
source§

impl<T> Eq for Pallet<T>

Auto Trait Implementations§

§

impl<T> RefUnwindSafe for Pallet<T>where T: RefUnwindSafe,

§

impl<T> Send for Pallet<T>where T: Send,

§

impl<T> Sync for Pallet<T>where T: Sync,

§

impl<T> Unpin for Pallet<T>where T: Unpin,

§

impl<T> UnwindSafe for Pallet<T>where T: UnwindSafe,

Blanket Implementations§

source§

impl<T> Any for Twhere T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for Twhere T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for Twhere T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
§

impl<T> CheckedConversion for T

§

fn checked_from<T>(t: T) -> Option<Self>where Self: TryFrom<T>,

Convert from a value of T into an equivalent instance of Option<Self>. Read more
§

fn checked_into<T>(self) -> Option<T>where Self: TryInto<T>,

Consume self to return Some equivalent value of Option<T>. Read more
§

impl<T> Conv for T

§

fn conv<T>(self) -> Twhere Self: Into<T>,

Converts self into T using Into<T>. Read more
§

impl<T> Downcast for Twhere T: Any,

§

fn into_any(self: Box<T, Global>) -> Box<dyn Any + 'static, Global>

Convert Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>. Box<dyn Any> can then be further downcast into Box<ConcreteType> where ConcreteType implements Trait.
§

fn into_any_rc(self: Rc<T>) -> Rc<dyn Any + 'static>

Convert Rc<Trait> (where Trait: Downcast) to Rc<Any>. Rc<Any> can then be further downcast into Rc<ConcreteType> where ConcreteType implements Trait.
§

fn as_any(&self) -> &(dyn Any + 'static)

Convert &Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &Any’s vtable from &Trait’s.
§

fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)

Convert &mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &mut Any’s vtable from &mut Trait’s.
§

impl<T> DowncastSync for Twhere T: Any + Send + Sync,

§

fn into_any_arc(self: Arc<T>) -> Arc<dyn Any + Sync + Send + 'static>

Convert Arc<Trait> (where Trait: Downcast) to Arc<Any>. Arc<Any> can then be further downcast into Arc<ConcreteType> where ConcreteType implements Trait.
source§

impl<T> DynClone for Twhere T: Clone,

source§

fn __clone_box(&self, _: Private) -> *mut ()

source§

impl<Q, K> Equivalent<K> for Qwhere Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

source§

fn equivalent(&self, key: &K) -> bool

Compare self to key and return true if they are equal.
§

impl<Q, K> Equivalent<K> for Qwhere Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

§

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more
§

impl<T> FmtForward for T

§

fn fmt_binary(self) -> FmtBinary<Self>where Self: Binary,

Causes self to use its Binary implementation when Debug-formatted.
§

fn fmt_display(self) -> FmtDisplay<Self>where Self: Display,

Causes self to use its Display implementation when Debug-formatted.
§

fn fmt_lower_exp(self) -> FmtLowerExp<Self>where Self: LowerExp,

Causes self to use its LowerExp implementation when Debug-formatted.
§

fn fmt_lower_hex(self) -> FmtLowerHex<Self>where Self: LowerHex,

Causes self to use its LowerHex implementation when Debug-formatted.
§

fn fmt_octal(self) -> FmtOctal<Self>where Self: Octal,

Causes self to use its Octal implementation when Debug-formatted.
§

fn fmt_pointer(self) -> FmtPointer<Self>where Self: Pointer,

Causes self to use its Pointer implementation when Debug-formatted.
§

fn fmt_upper_exp(self) -> FmtUpperExp<Self>where Self: UpperExp,

Causes self to use its UpperExp implementation when Debug-formatted.
§

fn fmt_upper_hex(self) -> FmtUpperHex<Self>where Self: UpperHex,

Causes self to use its UpperHex implementation when Debug-formatted.
§

fn fmt_list(self) -> FmtList<Self>where &'a Self: for<'a> IntoIterator,

Formats each item in a sequence. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T> Instrument for T

source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for Twhere U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

§

impl<T> IsType<T> for T

§

fn from_ref(t: &T) -> &T

Cast reference.
§

fn into_ref(&self) -> &T

Cast reference.
§

fn from_mut(t: &mut T) -> &mut T

Cast mutable reference.
§

fn into_mut(&mut self) -> &mut T

Cast mutable reference.
§

impl<T, Outer> IsWrappedBy<Outer> for Twhere Outer: AsRef<T> + AsMut<T> + From<T>, T: From<Outer>,

§

fn from_ref(outer: &Outer) -> &T

Get a reference to the inner from the outer.

§

fn from_mut(outer: &mut Outer) -> &mut T

Get a mutable reference to the inner from the outer.

§

impl<T> PalletVersionToStorageVersionHelper for Twhere T: GetStorageVersion + PalletInfoAccess,

§

fn migrate(db_weight: &RuntimeDbWeight) -> Weight

§

impl<T> Pipe for Twhere T: ?Sized,

§

fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere Self: Sized,

Pipes by value. This is generally the method you want to use. Read more
§

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere R: 'a,

Borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere R: 'a,

Mutably borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> Rwhere Self: Borrow<B>, B: 'a + ?Sized, R: 'a,

Borrows self, then passes self.borrow() into the pipe function. Read more
§

fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R ) -> Rwhere Self: BorrowMut<B>, B: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.borrow_mut() into the pipe function. Read more
§

fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> Rwhere Self: AsRef<U>, U: 'a + ?Sized, R: 'a,

Borrows self, then passes self.as_ref() into the pipe function.
§

fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> Rwhere Self: AsMut<U>, U: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.as_mut() into the pipe function.
§

fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> Rwhere Self: Deref<Target = T>, T: 'a + ?Sized, R: 'a,

Borrows self, then passes self.deref() into the pipe function.
§

fn pipe_deref_mut<'a, T, R>( &'a mut self, func: impl FnOnce(&'a mut T) -> R ) -> Rwhere Self: DerefMut<Target = T> + Deref, T: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.deref_mut() into the pipe function.
source§

impl<T> Same<T> for T

§

type Output = T

Should always be Self
§

impl<T> SaturatedConversion for T

§

fn saturated_from<T>(t: T) -> Selfwhere Self: UniqueSaturatedFrom<T>,

Convert from a value of T into an equivalent instance of Self. Read more
§

fn saturated_into<T>(self) -> Twhere Self: UniqueSaturatedInto<T>,

Consume self to return an equivalent value of T. Read more
§

impl<T> Tap for T

§

fn tap(self, func: impl FnOnce(&Self)) -> Self

Immutable access to a value. Read more
§

fn tap_mut(self, func: impl FnOnce(&mut Self)) -> Self

Mutable access to a value. Read more
§

fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Selfwhere Self: Borrow<B>, B: ?Sized,

Immutable access to the Borrow<B> of a value. Read more
§

fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Selfwhere Self: BorrowMut<B>, B: ?Sized,

Mutable access to the BorrowMut<B> of a value. Read more
§

fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Selfwhere Self: AsRef<R>, R: ?Sized,

Immutable access to the AsRef<R> view of a value. Read more
§

fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere Self: AsMut<R>, R: ?Sized,

Mutable access to the AsMut<R> view of a value. Read more
§

fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Selfwhere Self: Deref<Target = T>, T: ?Sized,

Immutable access to the Deref::Target of a value. Read more
§

fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Selfwhere Self: DerefMut<Target = T> + Deref, T: ?Sized,

Mutable access to the Deref::Target of a value. Read more
§

fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self

Calls .tap() only in debug builds, and is erased in release builds.
§

fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self

Calls .tap_mut() only in debug builds, and is erased in release builds.
§

fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Selfwhere Self: Borrow<B>, B: ?Sized,

Calls .tap_borrow() only in debug builds, and is erased in release builds.
§

fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Selfwhere Self: BorrowMut<B>, B: ?Sized,

Calls .tap_borrow_mut() only in debug builds, and is erased in release builds.
§

fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Selfwhere Self: AsRef<R>, R: ?Sized,

Calls .tap_ref() only in debug builds, and is erased in release builds.
§

fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere Self: AsMut<R>, R: ?Sized,

Calls .tap_ref_mut() only in debug builds, and is erased in release builds.
§

fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Selfwhere Self: Deref<Target = T>, T: ?Sized,

Calls .tap_deref() only in debug builds, and is erased in release builds.
§

fn tap_deref_mut_dbg<T>(self, func: impl FnOnce(&mut T)) -> Selfwhere Self: DerefMut<Target = T> + Deref, T: ?Sized,

Calls .tap_deref_mut() only in debug builds, and is erased in release builds.
source§

impl<T> ToOwned for Twhere T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
§

impl<T> TryConv for T

§

fn try_conv<T>(self) -> Result<T, Self::Error>where Self: TryInto<T>,

Attempts to convert self into T using TryInto<T>. Read more
source§

impl<T, U> TryFrom<U> for Twhere U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for Twhere U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
§

impl<S, T> UncheckedInto<T> for Swhere T: UncheckedFrom<S>,

§

fn unchecked_into(self) -> T

The counterpart to unchecked_from.
§

impl<T, S> UniqueSaturatedInto<T> for Swhere T: Bounded, S: TryInto<T>,

§

fn unique_saturated_into(self) -> T

Consume self to return an equivalent value of T.
§

impl<V, T> VZip<V> for Twhere V: MultiLane<T>,

§

fn vzip(self) -> V

source§

impl<T> WithSubscriber for T

source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more
§

impl<T> JsonSchemaMaybe for T

§

impl<T> MaybeDebug for Twhere T: Debug,

§

impl<T> MaybeRefUnwindSafe for Twhere T: RefUnwindSafe,

§

impl<T> Member for Twhere T: Send + Sync + Debug + Eq + PartialEq<T> + Clone + 'static,